Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Email:sales@geerady.com



Analyze the common parameters of electric forklift and its meaning

Analyze the common parameters of electric forklift and its meaning1. Electric forklift: size of the fork

It refers to an important size such as the long and width of the fork.

2. Electric forklift: Rated from weight:

When the center of gravity of the goods carried on the cargok is in the center of the forklift load, the maximum weight of the lifting cargo is often expressed in T (ton) unit.

3. Electric forklift: Load center distance:

When placing standard goods on the fork, the center of gravity of the cargo to the front end of the fork, often expressed in mm (mm).

4. Electric forklift: Maximum lifting height:

When the forklift is in a flat and sturdy ground, the forklift vertically placed in full load, and when the goods are raised to the highest position, the plane is on the plane to the vertical distance of the ground.

5. Electric forklift: Minimum turn radius:

It means that the forklift is rotated when there is no load operation, and the steering wheel is turned to the limit position. The outermost side of the vehicle body and the most innermost side to the center of the turning center are smaller, the smallest outer turning radius is smaller, the ground area required when the forklift is turned. The smaller, the better movement.

6. Electric forklift: Gate angle:

It means that the unloaded forklift is on a flat and sturdy ground, and the door frame is opposite the maximum inclination in the vertical position. The role of the front inclination is to facilitate the fork and unload the goods; the role of the back tilt angle is to prevent the goods from the fork when the car is running.

7. Electric forklift: Minimum ground clearance:

It means that the minimum point to the ground to the ground is referred to in the vehicle body, which indicates the ability of the forklift over the ground toggle the obstacle. The minimum separation of the ground is higher, and the higher the cross-performance of the forklift.

8. Electric Forklift: Maximum driving speed:

It is the maximum speed of the forklift in the no load state, usually km / h.

9. Electric forklift: Maximum lifting speed:

The maximum speed of the forklift is usually fixed when the forklift is fully loaded, and the maximum speed of the cargo is lifted in m / min (min / minute). Increase the maximum lifting speed, improve work efficiency, but the lifting speed is too fast, and it is easy to take care of the goods and the loss. At present, the largest lifting speed of domestic forklifts has been increased to 20 m / min.

10. Electric Forklift: Climbing Ability

With%, the ratio of the height (h) and horizontal distance (L) of the slope said that 10% of you can imagine a right angle, H = 10 meters, L = 100 meters. For example, the maximum ramp angle on the car can be 31 ¡ã, and the maximum climb is Tg (31 ¡ã) = 60%.

11 . Electric Forklift: Minimum ground clearance:

It means that the minimum point to the ground to the ground is referred to in the vehicle body, which indicates the ability of the forklift over the ground toggle the obstacle. The minimum separation of the ground is higher, and the higher the cross-performance of the forklift.

12. Electric forklift: wheelbase and spacing:

The wheelbase is the horizontal distance of the center line of the front and rear bridges before the truck. Taskets refer to the distance from the center of the left and right rounds on one axis. Increase the wheelbase, which is conducive to the longitudinal stability of the forklift, but increase the length of the body, and the minimum turn radius is increased. Increase the width, which is conducive to the lateral stability of the forklift, but increase the main width and minimum turn radius.

13. Electric Forklift: Minimum Width of Right Channel:

The minimum width of the right angle passage refers to the minimum width of the channel intersecting the tachral intersection of the forklift. Expressed in mm (mm). Generally, the smallest width of the right right channel is smaller, and the performance is getting better.

14. Electric Forklift: Electric Forklift: Minimum Width of Stacking Channel:


The minimum width of the stacking channel is the minimum width corresponding to the passage passage when the forklift is operating.


Article from: http://www.brcpower.co  Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery