This is generally used in the generator set and large truck. When it is necessary to add water, note: The electrolyte of the battery contains sulfuric acid, and any direct contact can cause skin burn. Be sure to do the necessary safety protection measures before performing the operation of the battery, such as using protective glasses, gloves, etc. If you need tools, there is enough insulation protection on the tool.1. If the electrodes of the battery are found to have a white / green / cyan powdery crystallization, the electrode is used to clean the electrode in time to ensure the electrode and the cable is in good contact. (Sodium bicarbonate has corrosive, once splashing to the car paint, to clean up in time).
2. Check if the battery is safely fixed on the battery frame, if there is loose phenomenon, tighten the fixing bolt. Excessive shaking will shorten the battery life.
3, regularly check whether the electrolyte in the battery is reduced. If you need, add distilled water, but don't excess. The normal liquid level should be adjusted at the bottom of the water injection hole. No maintenance of the battery does not require this maintenance.
4, check if the cable is tightly connected to the electrode. The joint will cause the car to be unable to start, as if the battery is dead.
5. Carefully check the housing of the battery, pay attention to cracks or other physical damage. If the battery has cracks, replace it in time to prevent leakage of electrolyte. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
