The forklift battery is typically served from a 2V voltage monobic battery to 24V / 36V / 48V / 72V / 80V, called an electric forklift battery pack. Within the same monobi battery, the negative plate is a total of more than the positive electrode plate. As a positive and negative plate cross-interspentry. Two sides of each positive electrode plate are generated in a chemical reaction, alleviate the deformation of the negative electrode plate, and the arches, and increase capacity. The battery separator is interposed between the positive and negative electrode plates, and there is a plurality of holes that make the electrolyte unobstructed.The forklift battery is strictly prohibited in the operation, and if the water level is lower than the polar plate, it is easy to burn the cruise plate, resulting in a short circuit of the forklift battery, and cannot work properly. Although it has been added in the later stage, the specific gravity of its monomer is not uniform, and there is a signs of vulcanization. The battery storage capacity is reduced, and the use time is shortened. Severely cause the entire set of forklift batteries.
It must be noted that in normal use, the battery cannot be discharged, that is, the travel motor and the oil pump motor cannot be operated simultaneously, otherwise, the fine sulfuric acid that is mixed with the active substance into a large crystal, increase the plate Resistance, it is difficult to restore it when charging, hinders the charging process. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
